Anjon EPDM Seam Tape Primer

Anjon EPDM Seam Tape Primer

Anjon EPDM Seam Tape Primer is required for use with all Anjon seam tape and flashing tape. Applying primer to both surfaces before taping allows the liner and tape materials to fully vulcanize together, creating a strong, watertight bond that holds up over time.

Compatible with both LifeGuard® 45 Mil and 60 Mil EPDM pond liners.

Available Sizes:

• 1 Quart (32 oz.)
• 1 Gallon

How to Use

1. Clean both liner surfaces thoroughly and allow to dry
2. Apply primer to both surfaces in the seam or flashing area using a brush or roller
3. Allow to become slightly tacky to the touch (approximately 15–30 minutes)
4. Apply Anjon seam tape or flashing tape and press firmly into place
5. Roll with a hand roller to eliminate air pockets and ensure full contact
6. Allow to cure for 24 hours before filling the pond

For use with Anjon 3" Double-Sided EPDM Seam Tape and Anjon 6" / 12" EPDM Flashing Tape.