Anjon 6" & 12" EPDM Flashing Tape

Anjon 6" & 12" EPDM Flashing Tape

Anjon’s EPDM Flashing Tape is made from vulcanized uncured EPDM rubber that stretches and conforms to any surface it’s applied to — ideal for flashing around pipes, drains, skimmers, waterfalls, and other pond penetrations where a standard flat seam won’t work.

Compatible with both LifeGuard® 45 Mil and 60 Mil EPDM pond liners.

Primer is required for proper adhesion. Both surfaces must be primed before application to allow the materials to fully vulcanize together. EPDM Seam Tape Primer is sold separately.

Available Sizes:

• 6" × 25'
• 6" × 50'
• 6" × 100'
• 12" × 50'

How to Use

1. Clean both surfaces thoroughly and allow to dry
2. Apply Anjon EPDM Primer to both surfaces in the flashing area; allow to become slightly tacky to the touch (approximately 15–30 minutes)
3. Stretch and press the tape firmly over the area, conforming it to the shape as needed
4. Roll with a hand roller to eliminate air pockets and ensure full contact
5. Allow to cure for 24 hours before filling the pond

Primer not included. For best results, always use genuine Anjon primer and tape together.